One Hat Cyber Team

Edit File: CONFIG.TEL

# CONFIG.TEL - for use with the NCSA Telbin emulator for DOS

myip=195.178.134.91         # receive my IP number from a BOOTP server
			    #   legal values are: a number of the form:
			    #       x.x.x.x, RARP, or BOOTP
			    #   Defaults to 127.0.0.1
netmask=255.255.255.192     # subnetting mask
			    #   Default is 0.0.0.0

#The following are the ISA boards supported:

hardware=packet            # packet driver interface 
interrupt=0		   #    PACKET DRIVERS ONLY ARE SUPPORTED
ioaddr=0x60		   #    ALL GENERIC DRIVERS HAVE BEEN REMOVED

windowgoaway=yes            # whether windows go away when closed
			    #   Default is no

autoscroll=no               # whether to autoscroll when at the top of the
			    # screen in scrollback
			    #   Default is yes

#clock=off                  # whether the clock is displayed or not
			    #   Default is on

termtype="vt220"            # the type of terminal emulation to perform
			    # currently only vt100 is supported
			    #   Default is vt100

outputfile="outmap.tel"       # path name of the output mapping file
			    #   Defaults to none

keyfile="keymap.tel"          # path name of your keyboard re-mapping file
#keyfile=standard.key       #

beep=yes                    # display musical note in session status
			    # on the status line when a ascii 7 is received
			    # in that session
			    #   Defaults to no

services=services	    # path to the services file for displaying
			    # network information
			    #   Defaults to none

tek=no                     # enable tektronix graphics
			    #   Default is on

video=vga                  # type of video screen
			    #    Legal values for video are:
			    #    cga,ega,pga,no9,hercules,ega43,vga50
			    #   Default is ega

bios=no                    # don't use slow BIOS screen access
			    #    bios=yes to reduce flicker on cga
			    #    bios=yes for TopView or Windows
			    #   Default is no

ftp=yes                     # do you want ftp enabled?
			    #   Default is no

ftpwrt=yes                  # FTP write access enabled?
			    #  Default is no

rcp=no                      # do you want rcp enabled?
			    #   Default is no

lpd=no                      # do you want lpd enabled?
			    #   Default is no

domainretry=5               # number of domain lookup retries
			    #   Default is 3

domain="imath.kiev.ua"          # default domain for hostname lookup
			    #   Default is none

domaintime=30               # timeout for a domain lookup
			    #   Defaults to 4

#concolor=070170            # Set the console colors
			    #   Default is 070170

#capfile=SCREEN.OUT         # default name for capture file
			    #   Default is none

#hpfile=hp.out              # file to write HPGL to,
			    #    COM1 can be used for attached plotter
			    #   Defaults to none

#psfile=ps.out              # file to write postscript to
			    #   Detaults to none

#tekfile=tek.out            # file to write Tek codes to
			    #   Defaults to none

arptime=8                   # arp timeout in seconds
			    #    affects machines on your local network
			    #   Defaults to 8
#passfile="nul"             # name of file to find FTP passwords in
			    #   Default is none
#
#  Following are individual machine specifications
#  Gateways are used in order that they appear in the file
#  Nameservers rotate, #1, #2, #3, #1, #2 when a request fails
#
#  The machine named "default" contains the fields which are automatically
#  filled in for later hosts
#
name=default                # Session name, "default" is a reserved name
			    #   Not a real machine, default parameters only
#host=                      # Actual host name of machine, not session name
			    #   Required
#hostip=                    # IP address of host, example is for SRI-NIC
			    #   Required
#gateway=0                  # This machine is a gateway for me
			    #   Default is no (0)
#nameserver=0               # This machine has a DOMAIN name server for me
			    #   Default is no (0)
scrollback=200              # number of lines of scrollback per session
			    #   Default is (0)
clearsave=on                # whether to save cleared line in scrollback
			    #   Default is on

# color codes for a specific session:
#       black, blue, green, cyan, red, magenta, yellow, white
#       BLACK, BLUE, GREEN, CYAN, RED, MAGENTA, YELLOW, WHITE
#
#       NOTE: when the highlighted colors are used for a background color,
#               they produce blinking text.
nfcolor=white                   # vt100 normal foreground color
				#   Default is green
nbcolor=black                   # vt100 normal background color
				#   Default is black
bfcolor=black                   # vt100 blink foreground color
				#   Default is black
bbcolor=white                   # vt100 blink background color
				#   Default is green
rfcolor=black                   # vt100 reverse foreground color
				#   Default is blue
rbcolor=white                   # vt100 reverse background color
				#   Default is black
ufcolor=WHITE                   # vt100 underline foreground color
				#   Default is blue
ubcolor=black                   # vt100 underline background color
				#   Default is black

erase=backspace                 # use delete code or backspace code for <- key?
				#   legal values are "delete" and "backspace"
				#   Default is "backspace"
vtwrap=yes                      # should VT100 be in wrap mode or not?
				#   Default is no
vtwidth=80                      # width of the vt100 screen
				#   legal values are 80 and 132
				#   Default is 80 (132 may not work correctly)
crmap=cr                        # map of the CR key for compatibility
				#   legal values are "4.3BSDCRNUL" and "LF"
				#   Default is "LF"
#duplex=half                    # modifier for non-echo mode, forces send
				#   legal value are "full" and "half"
				#   Default is full duplex
#font=Monaco                    # font for the window text (Unsupported)
				#   Default is Monaco
#fsize=9                        # fontsize for the window text (Unsupported)
				#   Deafult is 9
#port=23                        # value of the port to telnet to
				#   Default is 23
#ftpoptions="-n"                # modifier for the 'ftp back to PC' string
				# The string is sent as:
				#       "ftp <ftpoptions> <IP>
				#   Default is none
#outputmap=yes                  # Whether to use the output mapping for this
				#   machine.
				#   Legal values are: "yes" or "no"
				#   Default is no

#  The following entries affect the tuning of TCP connections to this host.
#  They should be set by the network administrator who is familiar with
#    the requirements of your specific network.
contime=120             # timeout in seconds to try connection
			#   before returning error to user
			#   Default is (120)
retrans=30              # starting retransmit time out in ticks
			#   1/18ths of sec
			#   Default is (5)
#mtu=256                 # maximum transmit unit in bytes
			#   This is not used anymore
#maxseg=256              # largest segment we can receive
			#   whatever the hardware can take, MAX=1460
			#   Default is (1460 or 512)
#rwin=1024               # most bytes we can receive without ACK
			#   =TCP window size, MAX=4096
			#   larger isn't always better
			#   Default is (4096)

#
#  Below this line, most of the communication parameters are obtained
#   from the "default" host entry.
#  Machine names, IP addresses, and special communication parameters are
#   present when needed.
#
#	PLEASE NOTE : THESE ARE EXAMPLES FROM THE UPE ENVIRONMENT
#		      PLEASE CHANGE THESE TO SUITE YOUR NEEDS
#
name=dad; host=dad.imath.kiev.ua; hostip=195.178.134.65; nameserver=1; gateway=1
#name=; host=gw-upe-petech; hostip=192.96.15.2; gateway=1
#name=hiPPo; host=hiPPo.ru.ac.za; hostip=146.231.128.1; nameserver=3
#name=ed; host=ed.petech.ac.za; hostip=192.96.7.1; nameserver=2
#name=ops11; host=ops11.upe.ac.za; hostip=192.96.15.11